# What Do The Numbers Mean On Graco Spray Tips? (Correct answer)

You may calculate how wide a fan the tip will form when sprayed 12 inches away from a surface by multiplying the first value by 2 and then dividing the result by 2. It is the second and third numbers that indicate the orifice size of the tip, which is measured in thousandths of an inch and defines how much fluid will be discharged from the spray tip.

• What do the numbers on Graco spray tips imply, therefore, in this context? You may calculate how wide a fan the tip will form when sprayed 12 inches away from a surface by multiplying the first value by 2 and then dividing the result by 2. It is the second and third numbers that indicate the orifice size of the tip, which is measured in thousandths of an inch and defines how much fluid will be discharged from the spray tip. What factors should I consider while selecting a spray tip?

## How do you read Graco tip size?

Understanding the Numerical Data

1. A 10 inch spray fan width (5 x 2 = 10)
2. The last two digits are the size of the tip opening in thousandths of an inch
3. The “17” in “517” denotes the size of the tip hole in thousandths of an inch
4. The first digit is half of the fan width
5. the “5” in “517” denotes a 10 inch spray fan width (5 x 2 = 10)
You might be interested:  Tips On How To Stay Hydrated? (Correct answer)

## What is a 517 spray tip used for?

A range of coatings, from lacquers to exterior paints, are sprayed with the reversible RAC IV SwitchTips, which are the most extensively used tip in the industry. Simply rotating the tip and spraying in the reverse position can clear tip obstructions in seconds, thanks to the Reverse-A-Clean (RAC) technology.

## What is a 211 spray tip used for?

The 211 spray tip is designed for working with light lacquers and spraying with more precision. For example, you might paint the rafters and window frames of a building. When painting bigger surfaces, such as ceilings or tables, it is preferable to use a 411 spray tip with lacquers or paints / interior materials rather than a standard paintbrush.

## What is a 215 spray tip used for?

The 215 SwitchTip has a 0.015-inch aperture and creates a fan that ranges from 4 to 6 inches in diameter. To remove blockages quickly and simply, turn the SwitchTip in the other direction. This product is suitable for residential, commercial, and industrial applications. It works well with a variety of materials, including lacquers, latex paints, and mastics.

## What do the 3 numbers mean in a tip size?

All of the tips will be embossed with three or four numerals. Two things may be deduced from these numbers. The size of the fan, followed by the volume and viscosity of the product that may be sprayed, are the three main considerations. The fan’s size is indicated by the first digit* on the serial number.

## What is a 311 spray tip used for?

A range of coatings, from lacquers to exterior paints, are sprayed with the reversible RAC IV SwitchTips, which are the most extensively used tip in the industry. Reverse-A-Clean (RACĀ®) is a function that allows you to easily clean tip blockages by simply spinning the tip and spraying in the opposite direction of the flow.

You might be interested:  How To Do Nail Tips? (Question)

## What is a 210 spray tip used for?

Fine finish spray tips are used for cabinetry, furniture, and interior trim work (to provide a smooth fine finish). For example, Graco FF LP spray tips: 210 and 310 are utilized for cabinetry, furniture, and interior trim work. Low-pressure tips are generally used for spraying at pressures ranging from 55 to 76 bar, depending on the application (800 to 1100 psi).

## What is a 411 spray tip used for?

The hole size of 011 inch is ideal for spraying thinner materials such as semi-transparent stains, water sealers, stains, and polyurethanes, among others. Less overspray reduces cleanup time while also reducing waste material usage.

## What is a 619 spray tip used for?

Sixteen hundred ninety-nine percent less overspray is produced by the 619 HEA tip while spraying latex paint and heavy primers. Due to the 12-14 in. spray pattern and the smooth feathery edges, this is an excellent tip for high-volume exterior painting and priming applications on the outside.

## What is a 519 spray tip used for?

With a wide selection of coatings, from stains to exterior paints, you can achieve better control and less overspray on a variety of diverse surfaces. Large surfaces such as houses/buildings, walls, and ceilings benefit from a 10 inch spray pattern that is perfect for bigger surfaces.

## What is a 313 tip used for?

Description of the product. A range of coatings, from lacquers to exterior paints, are sprayed with the reversible RAC IV SwitchTips, which are the most extensively used tip in the industry. Simply rotating the tip and spraying in the reverse position can clear tip obstructions in seconds, thanks to the Reverse-A-Clean (RAC) technology.

You might be interested:  How Do You Make Rib Tips? (Solution)

## What is a 315 spray tip used for?

When priming and painting fence pickets, the 315 tip is the best choice. When spraying pickets, the 6-inch fan pattern helps to reduce overspray.

## What is a 413 spray tip used for?

The Reverse-A-Clean (RAC) 413 RAC IV SwitchTip is intended for use on narrow surfaces and with thinner materials such as stains and polyurethanes, as well as for general cleaning. The 413 SwitchTip has a 0.013-inch aperture and creates a fan that is 8 to 10 inches in diameter and height. To remove blockages quickly and simply, turn the SwitchTip in the other direction.

## What is a 525 spray tip used for?

The Reverse-A-Clean (RAC) 525 RAC 5 SwitchTip generates a 10 to 12 inch fan and has a 0.025 inch opening, making it ideal for use in small spaces. To remove blockages quickly and simply, turn the SwitchTip in the other direction. This product is suitable for residential, commercial, and industrial applications. It works well with a variety of materials, including lacquers, latex paints, and mastics.

## What size tip should I use to spray primer?

One rule of thumb is that heavy-bodied primers and primer surfacers do their most effectively with nozzle sizes in the 1.7 to 2.2 range. Basecoats should be sprayed with a 1.4 to 1.6 nozzle to provide even coverage. Clearcoats should be sprayed with a 1.3 to 1.7 mm nozzle to provide even coverage.