Curtains: What to Consider Before Purchasing
- Always take the room into consideration.
- Always understand the purpose of the curtain.
- Lining and no lining.
- Always understand the density and thread count. Make a decision on the most appropriate color. It is important to have energy-saving properties.
- 1 How do I get the right size curtains?
- 2 Should curtains touch the floor or not?
- 3 When buying curtains are the measurements per curtain?
- 4 Should curtains touch the window sill?
- 5 What does D mean on curtains?
- 6 How much bigger should curtains be than the window?
- 7 Do short curtains look bad?
- 8 Should all curtains in a room be the same length?
- 9 How far should curtain rods extend past the window?
- 10 When you buy curtains do they come as a pair?
- 11 What is the standard size for curtains?
- 12 How wide should curtains be for 60 inch window?
- 13 Which curtain length looks best?
- 14 How many inches below window sill should curtains hang?
- 15 Is it OK to put long curtains on short windows?
How do I get the right size curtains?
From left to right, measure the length of the rod’s breadth. Generally speaking, the completed width of your curtains should be at least 2 times the width of your window (if not more – sheers can be 3 times the width of your window) in order to obtain the right fullness of the drapery.
Should curtains touch the floor or not?
Yes, the curtains should be long enough to reach the ground level of the room. With a few exceptions, the longer the curtains are, the more sophisticated and exquisite they will appear to be when they are drawn closed. As a result, the majority of conventional ready-made curtains are somewhat long. However, the fact is that different design styles need the usage of varied curtain lengths.
When buying curtains are the measurements per curtain?
Unless otherwise noted, all of our ready made curtains are offered in pairs, and the measurements shown relate to the total length of both curtains. If a pair of curtains is 46″ wide by 54″ long, there will be two curtains, each measuring 46″ wide, in the pair.
Should curtains touch the window sill?
If you’re in a formal or sophisticated environment, your drapes should be slightly above the floor. Curtains that hang down to the window sill or to the bottom of the window trim (also known as the apron) look wonderful and are functional in a kitchen setting. Hanging drapes of any length should never be done near a stove.
What does D mean on curtains?
A pleated heading on a pole is represented by the letter D. The distance between the finials on the pole is measured in inches. Drop the length of the pole from the eyelets to your desired finishing length.
How much bigger should curtains be than the window?
What is the ideal width of curtains? When closed, curtain panels should have a total width that is 2 to 2.5 times the width of the window or rod, in order to appear spacious. In other words, whether you are purchasing grommet type or rod pocket style draperies, the overall curtain width should be at least double the width of your windows and rods, as shown in the diagram.
Do short curtains look bad?
Curtains that are practically touching the window sill or reaching directly beneath the apron are particularly attractive in short lengths. As a result, your curtains may appear to be either longer or shorter than they actually are, which is one of the most common curtain design blunders.
Should all curtains in a room be the same length?
Curtains should be long enough to reach the floor, just as in most other rooms (give or take an inch). The only time curtains should be too short in the bedroom is if anything is in the way of their capacity to reach the floor.
How far should curtain rods extend past the window?
Generally speaking, drapes will be left open throughout the day, so make sure the curtain rod reaches at least four inches on either side of the inside frame of the window. Extend the rod up to 10 inches beyond the window’s frame to give the appearance of a larger window opening.
When you buy curtains do they come as a pair?
In spite of the fact that it appears obvious that curtains should be sold in pairs, curtains are not usually sold in pairs. The majority of the time, they are available in panels. Panels are made up of a single piece of cloth or a single window curtain. In order to create a standard curtain pair, you’ll need to purchase two panels.
What is the standard size for curtains?
Curtains are typically available in three lengths: 84 inches, 96 inches, and 108 inches in length. “The 84 inch standard curtains should be avoided unless you have really low ceilings, in which case they are acceptable. Generally speaking, they don’t seem appropriate in most situations and wind up being an odd length; “Curtis expresses himself in this way:
How wide should curtains be for 60 inch window?
How big should curtains be for a window that is 60 inches wide? In order to cover a 60 inch (152.4cm) window with curtains, you’ll need drapes with a final width that is at least 1.5 times that measurement, but better even are curtains that are twice that measurement or even three times that measurement for sheers.
Which curtain length looks best?
How Long Should Curtains Be? How Long Should Curtains Be? In most cases, floor-length curtains are preferable unless there is a radiator or a deep sill in the way. Panels are offered in a variety of lengths ranging from 63 to 144 inches. Measure the distance from the floor to the location where you will hang the rod, then round up.
How many inches below window sill should curtains hang?
However, whereas fashion historically commanded that curtains be placed just past the window sill, short enough to avoid becoming wet in a flood, today’s trend dictates that curtains be hung down to within 12 inches of the floor or even pool a little bit on the floor if the window is open.
Is it OK to put long curtains on short windows?
One of the simplest methods to boost the prominence of a short window and bring it into proportion with the rest of the room is to hang long curtains over it. The proper design and length will decrease the appearance of a shoddy window style and provide the impression that the window is much larger than it actually is.